background image

 
 

@2020 TE Connectivity family of companies 

All Rights Reserved 

TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks 

Completed form is TE confidential information 

During use of the LEMBAS USB Modem, do not hold or touch the device for a prolonged period of time 

with any part of the user’s body.  The LEMBAS USB Modem complies with required surface temperature 

limits, but even within these limits, sustained contact with warm surfaces for a prolonged period of time 
may cause personal injury.   

The LEMBAS USB Modem transmits electronic/radio signals to connect with wireless networks.  These 
emissions can negatively affect the operation of other electronic equipment, causing them to not operate 
or not properly operate.  When use of electronic devices is prohibited or restricted, such as while traveling 
in an aircraft, turn off the device and do not use the device.  Observe signs and notices and follow the 
directions of authorities that prohibit or restrict the use of electronic devices. 

The  emissions  from  the  LEMBAS  USB  Modem  may  interfere  with  the  proper  operation  of  medical 
equipment.    If  you  suspect  that  use  of  the  LEMBAS  USB  Modem  is  interfering  with  your  (or  another 

person’s)  medical  equipment,  turn  off  the 

device  and  do  not  use  the  device.    Consult  the  medical 

equipment manufacturer or a physician, if necessary, for further guidance. 

The emissions from the LEMBAS USB Modem may interfere with the proper operation of other types of 
electronic  devices.    Consult  the  manufacturer  of  those  electronic  devices,  if  necessary,  for  further 
guidance. 

Do  not  use  the  LEMBAS  USB  Modem  in  an  environment  which  may  contain  potentially  flammable  or 
explosive chemicals, vapors, gasses or particles.  Use of the LEMBAS USB Modem in such an environment 
may be hazardous and may result in serious personal injury.   

Keep the LEMBAS USB Modem out of the reach of children.  The LEMBAS USB Modem is not a toy, and 
contains small parts that may present a choking hazard. 

 

FCC Statement 

The FCC ID of LEMBAS USB Modem is 2A4DX-2195873-1. This ID and other related information such as 
SDoC  information  can  also  be  found  in  the  README  file  in  the  mass  storage  directory  of  the  device 
/media/<username>/tedongle/LEMBAS_SW_Package_V1.0,  which  can  be  accessed  by  connecting  the 
device to a single board computer (SBC). 
 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1)  This  device  may  not  cause  harmful  interference,  and  (2)  this  device  must  accept  any  interference 
received, including interference that may cause undesired operation. 

The LEMBAS USB Modem has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful  interference  in  a  residential  installation.  This  device  generates,  uses  and  can  radiate  radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in 
a particular installation. If this device does cause harmful interference to radio or television reception, 
which can be determined by turning the device off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

Содержание LEMBAS










Отзывы: