408- 1559
Rev
T
4
of 10
Figure 4
PIDG
Terminal
Wire
Stop
PIDG FASTON
Receptacle
PLASTI-GRIP
Terminal
PIDG Insulation
Restricting Terminal
C
B
“B” Equals Wire Barrel
“C” Equals Insulation Barrel
Wire Barrel Butts
Against Locator
End of Wire Conductor Butts Against Tool
Locator (For PIDG FASTON Receptacle,
Wire Butts Against Wire Stop)
C
B
C
B
C
B
3.2. Spare Wire Cap
1. Strip the wire to the dimension provided in
Figure 3 being careful to avoid nicking or cutting
the conductor(s).
DO NOT use wire with nicked or missing
conductor(s).
2. Place the tool insulation crimp adjustment pins
in Position 3.
3. Close the tool handles until the jaws partially
close, but leave enough space for the spare wire
cap to be inserted between the jaws.
4. Raise the locator so that the end of the cap
rests against the recessed surface of the locator as
shown in Figure 6.
5. Close the tool handles until the spare wire cap is
held firmly in place. DO NOT deform the wire
barrel.
6. Insert a properly stripped wire into the wire
barrel until the wire bottoms.
Figure 5
PIDG Butt
Splice
“B” Equals Wire Barrel “C” Equals Insulation Barrel
PLASTI-GRIP
Butt Splice
Window
Indent
Wire
Stop
Locator Seats in
Window Indent
First Crimp
End of Wire Conductor Butts
Against Wire Stop
Insulation Crimp Adjustment
Pins in Position 3
Second Crimp
Locator Seats in
Window Indent
End of Wire Conductor Butts
Against Wire Stop
Window
Indent
Wire
Stop
C B
C
B
Figure 6
Spare Wire Cap
“B” Equals Wire Barrel
Insulation Crimp
Adjustment Pins
in Position 3
Wire Bottomed
in Cap
Raise Locator So that End of
Cap Rests Against Recessed
Surface of Locator
B
CAUTION
!