409- 10055
Rev F
4
of 8
Typical Crimping
Head (Ref)
SDE Adapter
Trigger
Battery
Cartridge
1725839--1
Battery Lock
Battery Powered
Crimp Tool
Release Switch
(1213805--1, --2,
and --5 Only)
Quick--Release
Pin 217873--2
Quick--Release
Pins 217873--1
(Recommended
Spare)
(Recommended
Spare)
CRIMPING TOOL (with Battery Installed)
Length
305 mm [12 In.]
Width
60 mm [2 3/8 In.]
Depth
80 mm [3 1/8 In.]
Mass/Weight (w/Battery)
1.3 kg [2.9 lb.]
Sound Level
75 dBA at 1 Meter
Vibration
< 2.5 m/s2
Hydraulic Oil
Shell Tellus T 15
CRIMPING CAPACITIES
Maximum Crimping Force
15.6 kN [1.75 Tons]
Average Crimping Time
2 Seconds
Average Crimps Per Charge
Approximately 150
BATTERY
Charging Voltage
9.6 V
Charging Time
40 Min
Figure 1
1. INTRODUCTION
The CERTI--CRIMP II Battery Powered Crimp Tool Kit 1213805--[ ] is comprised of the battery crimp tool (with
the SDE Hand Tool Adapter installed), as well as two rechargeable battery cartridges (1725839--1) to power
the tool. See Figure 1. Each kit has a battery charger. The battery charger part number, its voltage, and the
kit’s region of use are listed in the table below. A battery tool may have a release switch to retract the ram as
listed in the table below. The CERTI--CRIMP II Battery Powered Crimp Tool Kit is designed to adapt the
crimping head from any CERTI--CRIMP II straight action hand tool (SAHT) for use with the battery powered
