408-2710
Rev
H
2
of 10
Table 1 lists the dimensions for each die set. The weight is approximately 794 g [1 lb 12 oz].
NOTE
Dimensions in this instruction sheet are in millimeters with [inches in brackets]. Figures are for reference only and are not
drawn to scale.
Figure 2: Dimensions
1
Length
2
Width
3
Height
Table 1: Dimensions by die set
Dimension
Die set
68253-1
68304-1
68361-1
59867-1
Length
61.98 [2.440]
71.50 [2.815]
61.98 [2.440]
Width
41.28 [1.625]
Height
73.76 [2.904]
Each die assembly, when installed in the crimping head, crimps AMPOWER Quick-Disconnect Terminals onto
standard wire sizes as listed in Table 3.
These instructions provide specific information regarding the die assemblies and applicable terminals. For
information regarding die insertion/removal and general operation, refer to the appropriate series 408
instruction sheet or series 409 customer manual listed in Table 2.
Table 2: Documentation
Product
Document
DYNA-CRIMP Crimping Head
Hydraulic Power Unit
Hydraulic Hand Pump
Read these instructions thoroughly before crimping terminals.
