Table of Contents:
1. General Information .................................................................. 2-3
– DANGER: Safety rules .....................................................................2
– CAUTION: Personal Safety ............................................................2
– WARNING: Tool Use and Care .......................................................2
– CAUTION: Battery and Charger Use and Care .........................2
– Features .............................................................................................2
– Specifications ...................................................................................2
2. Part & Accessories .........................................................................3
– Hydraulic Compression Tool.........................................................3
– Battery (BAT-MK) .............................................................................3
– Charger ..............................................................................................3
– Tool Hand Bag ..................................................................................3
3. Operating instructions .................................................................3
– Charging the battery ......................................................................3
– Attaching & Detaching the battery pack ...................................3
– Compression cycles ........................................................................4
– Switch operations ...........................................................................4
– Compression operation .................................................................4
4. Troubleshooting guide ................................................................ 4
Read and understand all instructions and
safety information in this manual
before operating or servicing this tool.
Be aware of proper usage and potential
hazards.
Important
CAUTION:
•
Installations should be performed by a qualified
electrician in accordance with national and local
electrical codes.
WARNING:
•
Risk of shock, disconnect power before
installation.
•
Never attempt to make a compression on a “HOT”
Line.
•
Never assume the power is OFF! Determine
beforehand if any electrical hazards could exist
when making a connection to line or wire.
•
Tools are NOT insulated for use on or near
conductors. Use of these tools near energized
conductors may lead to electrical shock, causing
severe injury or death.
DO NOT
use these tools
near energized conductors.
CAUTION:
•
Wear safety glasses and any other required PPE.
WARNING:
•
Pinch points, keep hands and other body parts
away from the crimping head when crimping.
Compression dies at high force can cause severe
personal injury. Failure to observe this warning
could result in severe injury or death.
1 of 5
—
OPERATING INSTRUCTIONS
Hydraulic compression tool
TBM15CR-LI
