General Information:
DANGER:
Safety rules:
•
Keep work area clean and well lighted. Poor
lighting and cluttered areas invite accidents.
•
Maintain tool with care. Keep tool in good
condition at all times. Keep it clean to help ensure
best and safest performance.
•
Don’t over-reach. Keep proper footing and balance
at all times.
•
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
•
Keep bystanders out of the work area while
operating a power tool.
CAUTION:
Personal Safety:
•
Do not use a tool while tired or under the influence
of drugs, alcohol or medication.
•
Use all required personal protection equipment.
WARNING:
Tool Use and Care
•
Perform regular tool maintenance to help ensure
trouble free service.
•
Store tool in a cool dry area.
•
After each use, wipe tool with clean cloth to
remove any residue, especially close to the
movable parts.
•
Regularly lubricate moving parts.
•
Clean plastic housing with a soft soaped cloth.
•
Follow battery and charger use and care
instructions.
•
Do not force the tool.
•
Discontinue use if on/off switch does not function
properly. Contact tool services for repairs.
•
Disconnect the battery pack from the tool before
making any adjustments, changing accessories
(including dies), or storing.
•
When not in use, store tools out of the reach of
children and unauthorized personnel.
•
Regularly inspect tool for for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the tool’s
operation. Repair any damaged tool before use.
CAUTION:
Battery and Charger Use and Care
•
Read all instructions and cautionary markings on
battery charger, battery pack, and product using
battery pack.
•
To reduce the risk of injury, charge only MAKITA
LXT 18V battery packs.*
•
Do not expose charger and/or battery pack to
precipitation, submerge in water.
•
To reduce risk of damaging the electric plug and
cord, Do not pull cord when disconnecting charger.
•
Protect cord from being stepped on, tripped over,
or otherwise subjected to damage or stress.
•
Do not disassemble charger or battery pack,
contact Tool Service Center at 1-800-284-TOOL
(8665) when service or repair is required.
•
Do not store the tool and battery pack in damp or
wet locations or where the temperature may reach
or exceed 50°C (122°F) (such as a metal tool shed,
or a car in the summer), which can lead to
deterioration of battery’s ability to hold a charge.
•
Do not pierce or open battery casing.
•
Do not charge battery pack when the temperature
is below 0°C (32°F) or above 40°C (104°F).
•
The charger is designed to operate on standard
120V AC electrical power only. Do not use it on any
other voltage.
•
Charge the battery pack in a well-ventilated
location.
•
Only use battery and charger with accessories
designed for ABB Model TBM15CR-LI.
•
Do not use recycled or secondary market
accessories or batteries.
CAUTION:
Battery and Charger Use and Care - continued
•
Do not short the battery pack or allow metal
objects to touch the terminals.
•
After removing the battery pack from the tool or
the charger, always re-attach the pack cover.
•
Replace damaged or deteriorated battery pack.
Follow proper disposal of old battery pack.
Features:
•
Fully automatic, self-contained power tool.
•
Removable battery cartridge - simply change the
cartridge for continuous use.
•
One handed operation - control ram advancement
and retraction with one hand.
•
Protective rubber boot on “C” Head.
Specifications:
Hydraulic Compression Tool - TBM15CR-LI:
•
Drive Unit: 18V DC motor
•
Dimensions: 23.5”L x 3.5”W x 10.5”H
•
Weight: 19.8 lbs.
•
Capacities: 750 kcmil CU or Aluminum
•
Jaw Opening: 1.65"
Battery (BAT-MK):
•
Battery type: MAKITA LXT Lithium Ion*
•
Voltage: 18V DC
•
Capacities: 5.0Ah
•
Weight: 1.4 lbs.
•
Charging time: 45 min. 100% Capacity
Charger (CHR-MK):
•
Input voltage: 120V 50-60 HZ AC Single Phase
•
Weight: 1.7 lbs.
*ABB Installation Products Inc. and its related companies are not affiliated, associated, authorized, sponsored, endorsed by or in any way officially connected with
Makita Corporation or any of its subsidiaries or its affiliates. MAKITA and LXT are trademarks of Makita Corporation.
2 of 5
