Instruction Sheet
1
of 8
© 2020 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
408-160034
06 NOV 20
Rev A
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Unless otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. Figures and
illustrations are for identification only and are not drawn to scale.
1.
INTRODUCTION
The Manual Arbor Press with Removable Tooling Packs is designed to crimp TE Amplivar
TM
splice product on
strip. It has two styles of Tooling Packs, one for terminating Amplivar
TM
splices in a through splice configuration
and one for terminating Amplivar
TM
splices in a pig-tail splice configuration.
2.
DESCRIPTION
The Manual Arbor Press with Removable Tooling Packs consists of a main Manual Arbor Press assembly
2380993-[] and pig-tail (ie 2380996-[]) or through (ie 2380997-[]) splice style Tooling Packs that can be
installed and removed from the arbor press assembly. The Arbor Press and Tooling Packs are sold separately.
Each Tooling Pack includes the necessary tooling to feed a specific splice, shear the splice from its carrier, and
crimp each splice terminal to magnet or lead wire. The Manual Arbor Press is outfitted with a stroke limiter
mechanism that requires the operator to make a full stroke of the arbor press ram before allowing the ram to
return to top dead center. This feature ensures that all terminations are produced at a consistent crimp height.
The Manual Arbor Press also includes a shut height coarse adjustment and fine adjustment with increments of
0.02mm/
.0008”.
All Tooling Packs include a terminal lubricator assembly.
NOTE
Use terminal lube with this equipment to improve crimp consistency and reduce crimp forces.
Figure 1
Manual Arbor Press with Removable
Tooling Packs
