background image

409-35003 

Rev B  

of 9

 

SAFETY PRECAUTIONS 

 READ THIS FIRST! 

IMPORTANT SAFETY INFORMATION 

NOTE 

Keep all decals clean and legible, and replace them 
when necessary. 

 

DANGER 
ELECTRIC SHOCK HAZARD 

 

This tool is not insulated. When using this unit near 
energized electrical lines, use proper personal protective 
equipment. 

Failure to observe this warning could result in severe 
injury or death.  

 

DANGER 
SKIN INJECTION HAZARD 

 

Do not use hands to check for oil leaks. Highly 
pressurized oil will puncture the skin causing serious 
injury, gangrene, or death. If injured, seek medical help 
immediately to remove the oil.  

 

DANGER 
FIRE HAZARD 

 

Do not use solvents or flammable liquids to clean the 
crimping tool. Solvents or flammable liquids could ignite 
and cause serious injury or property damage. 

Failure to heed these warnings could result in severe 
injury from harmful fumes or burns from flying debris. 

 

DANGER 
FIRE HAZARD 

 

Do not dispose of batteries in a fire. They will vent 
fumes and will explode. Instead, dispose of batteries in 
an environmentally responsible manner or send the 
battery back to TE.  

 

DANGER 

Inspect the tool and jaws/dies before each use. Replace 
any worn or damaged parts. A damaged or improperly 
assembled tool can break and strike nearby personnel. 

Failure to observe this warning could result in severe 
injury or death. 

 

CAUTION 

 Do not place the tool in a vise. The crimping tool is 

designed for hand-held operation. 

 Protect the crimping tool from rain and moisture. 

Water will damage the crimping tool and battery. 

Failure to observe these precautions may result in injury 
or property damage. 

 

CAUTION 

 Do not allow anything to contact the battery 

terminals. 

 Do not immerse the batteries in liquid. Liquid may 

create a short circuit and damage the battery. If the 
batteries are immersed, contact your service center for 
proper handling. 

 Do not place the battery into a pocket, tool pouch, or 

tool box with conductive objects. Conductive objects 
may create a short circuit and damage the battery. 

 Do not place a battery on moist ground or grass. 

Moisture may create a short circuit and damage the 
battery. 

Failure to observe these precautions may result in injury 
or property damage. 

 

CAUTION 

 Do not store the battery at more than 60°C [140°F]. 

Damage to the battery can result. 

 

Do not use another manufacturer’s charger.

 

 Do not attempt to open the battery. It contains no 

user-serviceable parts. 

Failure to observe these precautions may result in injury 
or property damage.  

 

CAUTION 

 Do not perform any service or maintenance other 

than as described in this manual. Injury or damage to 
the tool may result. 

Failure to observe these precautions may result in injury 
or property damage.  

 

Содержание 2844990-1










Отзывы: