*) VR2020-LD only
Signal
*)
blinking
on
off
Not connected to the mobile network, registered, no signal.
I
Registered on a mobile cell.
Signal level between 0% and 17%
Signal level between 17% and 33%
II
Signal level between 33% and 50%
Signal level between 50% and 66%
III
Signal level between 66% and 83%
Signal level between 83% and 100%
Micro-USB console port with integrated USB-to-serial adapter.
Alarm
-LED to display important / critical events.
Status LEDs:
xDSL
off
Not synchronized/no pilot tones.
blinking
Synching/training phase.
on
The xDSL-interface is successfully synchronized.
flashing
Data transmission via xDSL.
Power
off
Router is not connected to the power supply.
on
Voltage applied.
Reset
button
Reset button
press briefly
(<1 sec)
Restarts the router.
press and hold
(>5 sec)
Resets the device to its factory defaults.
2.3
Rear side
Connection
Description
xDSL
RJ45/RJ48s connection for linking the TAE socket to the router.
WAN
10/100/1000BaseT interface RJ45/RJ48s.
Features an automatic speed detection as well as the cable type (1:1 or crossed).
GPS/GNSS
*)
Optional connection for an antenna determining the position via a global navigation satellite
system (GPS/GLONASS).
Serial
Optional serial interface in the form of a clamping strip (triple-pole Rx, Tx, GND).
LAN 1-4
10/100BaseT 4-Port switch.
–
These ports have their own MAC addresses, are auto-sensing and
can be separated virtually as required.
