Fiber Optic Indicator
A single green LED indicator next to the
fi
ber optic input port on the RZ6-A-P1 lights when a
Medusa preampli
fi
er is correctly synced with the RZ6.
RZ6 Technical Speci
fi
cations
The RZ6 can be equipped with a
fi
ber optic input port and used with a four channel Medusa preampli
fi
er. See the
preampli
fi
er's technical speci
fi
cations for A/D converters.
Note
DSP
Up to four standard DSPs and/or quad-core (QZDSP)
DSP: 400 MHz DSPs, 2.4 GFLOPS peak per DSP
QZDSP: Four 400 MHz DSPs, 2.4 GFLOPS per core
Memory
64 MB SDRAM per standard DSP
256 MB DDR2 RAM per core, four cores per QZDSP
Digital I/O
8 programmable bits: 3.3 V, 25 mA max load
2 programmable bytes (16 bits): 5.0 V, 35 mA max load
Fiber Optic Ports
Optional Input Available on RZ6-A-P1 only
Supports 4-channel Medusa preampli
fi
er or HTI3 Head Tracker Interface (serial number 1007
and greater)
D/A
2 channels, 24-bit sigma-delta
Sample Rate
Up to 195312.50 Hz
Frequency Response
DC - 0.44*Fs (Fs = sample rate)
Voltage Out
± 10.0 V
S/N (typical)
115 dB (20 Hz - 80 kHz at 5 V RMS)
THD (typical)
-90 dB (1 kHz output at 5 V RMS)
Sample Delay
31 (serial numbers > 2000)
47 (serial numbers < 2000)
Output Impedance
1 Ohm
RZ6 Multi I/O Processor | 17