
PZ5 Data and Control Flow Diagram
Hardware Setup
TDT recommends fully charging the PZ5 before use. The PZ5 battery charger connects to the
round female connector located on the back panel.
A 5-meter paired
fi
ber optic cable is included to connect the PZ5 to the base station. The
connectors are color coded and keyed to ensure proper connections.
The diagram below illustrates the connections necessary for PZ5 operation.
System Connection Diagram for PZ5 with RZ2
To avoid introducing EMF noise, DO NOT connect the charger to the PZ5 while collecting data.
Important
PZ5 NeuroDigitizer | 6