*) G3000-L only **) G3000-W only
2
Hardware
–
Getting started
2.1
Package contents
The following accessories are included with the G3000 router:
Router
Power supply (12V, 2A)
Ethernet-/LAN-cable
Antenna for mobile radio
*)
Antenna for WiFi
**)
2.2
Front side
On the front of the G3000 router are arranged from left to right:
Status LEDs:
Note
➢
The bootup is symbolized by a chase light.
eth0
off
No link existing on the eth0 ports.
on
The eth0 port has an active link.
flashing
Data transfer via the eth0 port.
eth1
off
No link existing on the eth1 ports.
on
The eth1 port has an active link.
flashing
Data transfer via the eth1 port.
eth2
off
No link existing on the eth2 ports.
on
The eth2 port has an active link.
flashing
Data transfer via the eth2 port.
Cellular
off
If the signal LEDs are off as well the router is not registered on any mobile cell and it
has no signal in its own network.
If any signal LED is on it is registered in the 2G network (GPRS / EDGE).
blinking
The router is registered in the mobile network and a 3G signal (UMTS / HSPA / +) is
present.
on
The current technology is 4G (LTE) and the router is registered in a cell.
