background image

Hard coat

Polycarbonate 

Data 

Polycarbonate

Label

Polycarbonate 

Data 

Label

Polycarbonate 

Data 

Polycarbonate

Label

Disc Types

When discs were invented the process of 

construction was quite simple. These are what 

we call CD discs. To produce the disc, a solid 

polycarbonate disc was made. Then the data layer 

was applied to the top surface of the disc. To protect 

this data layer, a lacquer, or label, was then applied 

over the top of the data layer.

The early CDs were mainly used for audio and so 

often a small scratch was not enough to disrupt the 

data. However as the data on discs became more 

complicated it became more important to protect 

the data layer. On DVD discs the data layer is 

sandwiched in the middle of the disc between two 

pieces of polycarbonate. This protects the data layer 

and makes the disc virtually indestructible. The only 

issue with this type of disc is that the two layers of 

disc can separate around the whole in the centre of 

the disc, although this is quite rare.

Because the data is so protected virtually all DVD 

discs can be repaired by the disc repair process.

This made the data layer quite vulnerable because 

any scratch to the label could damage the data layer 

beneath. If a scratch has reached the data layer 

it is not repairable. Disc repair can only repair the 

polycarbonate on the underside of the disc.

CDs

DVDs

Blu-rays

Formats:

   Audio Books

   Audio CDs

   CD-ROMS

   Playstation version 1 discs

Formats:

   DVDs

   Playstation 2 discs

   Xbox

   Wii

   DVD ROM

With the invention of High Definition (HD) there was 

a need to carry more information on a disc and soon 

the data space on a DVD was not enough. Sony 

solved this with the invention of the Blu-ray disc.

It is essentially the same as a DVD with 2 main 

differences:

1. The polycarbonate on the bottom of the discs is 

    much thinner than a DVD and so the number of 

    times that the same disc can be repaired falls to 

    around 10-15.

2. The polycarbonate on the bottom of the disc 

    has a hard coated lacquer on top of it. This hard 

    coat reduces the chance of the disc being   

    scratched in the first place, but nonetheless 

    scratches can still happen.

    Formats:

       Blu-ray films

       Playstation 3

       Playstation 4

       Xbox One

   

Page 11

Содержание VMI QUICKSAND















Отзывы: