6
HIGH BRIGHT DISPLAY CCFL
TO
LED BACKLIGHT REPLACEMENT
REPLACING THE CCFL INVERTER TO AN LED DRIVER
BOARD
Tools:
1 - ESD wrist strap with grounding cord.
1 - #1 Phillips screwdriver
To replace the CCFL inverter to an LED driver board, complete the following procedure:
1. Put the ESD wrist strap on and attach the cord to ground.
2. Disconnect the inverter cable from the inverter.
3. Using the #1 Phillips screwdriver, remove the two screws securing the inverter to the bracket. Set aside.
4. Remove the inverter board. Set the LED driver board in place in the bracket. Using the #1 Phillips
screwdriver and the two previously removed screws, secure the LED driver board in place.
5. Reconnect the inverter cable to the driver board.
