F
IELD
R
EPLACEMENT
P
ROCEDURE
11
6. Pull the white wire towards the end of the bulb. Carefully lift the rubber stopper and bulbs out of the rail.
BE CAREFUL not to break the tubes as there is a small amount of mercury inside.
7. On the other end, carefully pull the rubber stopper and bulbs out of the rail. Again, be careful not to break
the tubes. Set the bulbs aside.
8. Obtain one LED strip. Peel the protective backing off the strip. Line up the end of the strip with the end
of the rail. Slowly lower the strip into the rail putting light pressure on it to ensure the adhesive sticks to the
rail. The LED strip will slightly surpass the edge of the rail.
REPLACING THE CCFL BACKLIGHTS WITH THE LED
BACKLIGHTS OPTREX DISPLAY
cont...
