6
BA-PZ3_ML / F0354400
1.2
Information and obligations for the operator
•
The system may emit interference.
-
The system has been tested in accordance with EMC legislation.
-
The operator must verify and assure electromagnetic compatibility with other
electrical and electronic equipment in the immediate vicinity of the system.
•
Ensure that:
-
Operating personnel have read and understood these operating instructions.
-
Anyone working near the device is made aware of the dangers and is provided with
the necessary protective equipment.
-
Repairs are only carried out by qualified persons.
•
In particular, make operating personnel aware of the safety instructions in this
document.
•
Always keep the system in fully functional condition.
•
Any modifications made to the device will invalidate the operating licence and the
warranty. Exception: Such modifications are expressly authorised by the manufacturer.
1.3
Impermissible operating conditions
The device must not be operated under the following conditions:
•
In explosive (Ex) zones
•
In areas with severe build-up of dust
•
In environments where the humidity is too high (see chapter 3 Technical data )
•
At altitudes of more than 2.000 m above sea level
•
Where there are strong vibrations
1.4
Emissions
The connected plasma generator produces the following emissions:
•
Ozone (O
3
)
Example:
Plasma gas
Gas flow
Ozone
Air
Ca. 8 l/min
< 0,12 g/h
Note!
As a precautionary measure, we recommend an extraction system with about 100 m³/h in
the direct vicinity of the plasma outlet.
(ES) Equipements Scientifiques SA - Département Composants & Modules - 127 rue de Buzenval BP 26 - 92380 Garches
Tél. 01 47 95 99 84 - Fax. 01 47 01 16 22 - e-mail: [email protected] - Site Web: www.es-france.com
