69
Configuring Field Properties
(Free Design Template)
Clicking the
button and then
Properties
displays a dialog box that you
can use to change the properties of a field.
Note
The unit of measurement (millimeters, pixels, inches) used on the
Field
Properties
dialog box is the same as that selected with the ruler unit of
measurement button (Page 59).
To reposition and resize a field
1.
Select the field you want to reposition. On the main window, click
.
Note
If multiple fields are selected, only the reference field (the one with
the gray selection boundary) can be repositioned.
2.
On the menu that appears, click
Properties
.
This displays the
Field Properties
dialog box.
Print Area Location
These values indicate the
relative location of the
print area from the upper
left corner of the work
area. Changing the values
in the box causes the
print area to move to the
new location.
3.
Input the values you want. The settings you configure are reflected in
the preview image on the main window.
4.
Click the
Size
tab.
Size and Zoom Factor
Inputting a value in one box automatically changes the value in the
other box.
Maintain aspect ratio
When this check box is selected, the field is resized while maintaining
the relative ratio between its vertical and horizontal dimensions.
When this checkbox is cleared, a field can be resized by changing the
horizontal or vertical dimension only.
Dimensions:
These are the dimensions of the image when it was originally cap-
tured or imported from a file.
5.
Input the values you want and then click
OK
. The settings you configure
are reflected in the preview image on the main window.
