3
TDK-Lambda
LS 200 Series
INSTRUCTION MANUAL
2.3. Basic connection (Local sensing)
(1)
Connect “+S” terminal to “+Vm” terminal with sensing wire
(2)
Connect “-S” terminal to “-Vm” terminal with sensing wire
(3)
Connect “CNT+” terminal to “CNT-” terminal with wire
•
Please use attached CN2 connector for each connection.
2-4. Remote sensing required
(1)
Connect “+S” terminal to “+Vm” terminal of load with sensing wire.
(2)
Connect “-S” terminal to “-Vm” terminal of load with sensing wire.
(3)
Connect “CNT+” terminal to “CNT-” terminal with wire.
•
The accuracy of output voltage will be affected when sensing terminal is opened.
7
8
1
2
