TDK-Lambda LC1202, Инструкция по эксплуатации

Страница: 11 / 50

83494001 Rev H Page 3 of 27
2.11 STABILITY
<0.2%/hr after 1 hr warm up
2.12 PULSE REPEATABILITY
±0.1% to 300Hz - Standard
±0.3% to 1000Hz - Standard
±0.1% to 1000Hz - Available
2.13 PHYSICAL DIMENSIONS
8.75”/222mm H (5U) x 19”/483mm W x 17”/432mm D. Depth of handles over panel
7/8”/20mm.
2.14 WEIGHT
Approximately 100 pounds/46 kg
2.15 MOUNTING
Chassis support rails or brackets required.
2.16 WATER FITTINGS
Swagelok 12mm
2.17 COOLING WATER
2GPM/7.6 liters/min, max supply temp 35°C. All water paths are at ground potential
and are copper or brass. An analog temp signal, 0-10VDC, is provided for a heat sink
temp of 10°-60°±3°C at the DB-25 remote connector.
2.18 AIR COOLING
Internal, 100CFM. Supply makeup air not required.
2.19 AMBIENT TEMPERATURE
2.19.1 STORAGE:
–20°C to +70°C
2.19.2 OPERATING:
+5°C to +45°C
2.20 HUMIDITY
<90%, non-condensing
2.21 FAULT PROTECTION
Three line fuses, accessible through rear panel of power supply.
2.22 PROTECTION
The power supply is protected against open and short circuit operation, current over-
loads, and arcs.