45
CHAPTER 4:
INSTALLATION
CAUTION
Observe all torque guidelines within this manual. Over torque may damage unit or accessories. Such
damage is not covered under
manufacturer’s warranty.
4.1
General
This chapter contains instructions for initial inspection, preparation for use Connection to PC, setting
the communication port and linking
Power System is described in the User manual.
NOTE
Power System's supplies generate magnetic fields, which might affect the operation of
other instruments. If your equipment is susceptible to magnetic fields, do not position it adjacent to the
power system.
4.2
Preparation for Use
In order to be operational, the Power System must be connected to an appropriate AC main. The AC
mains voltage should be within the Power System specification. Do not apply power before reading the
safety instructions and Section 4.7.
Follow the instructions in Table 4-1 in the sequence given to prepare the Power System for use.
Step no.
Item
Description
Reference
1
Inspection
Initial physical inspection of the power system.
Section
2
Packing Box
Packing Box Unpack.
Section 4.4
3
Installation
Installing the power system, Ensuring adequate
ventilation.
Section 4.5
4
AC mains
AC mains requirements.
Connecting the Power System to the AC mains.
Section 4.7
5
Test
Turn-on checkout procedure.
Section 4.8
6
Load connection
Wire size selection. Local / Remote sensing. Single
or multiple loads.
Section 4.9
7
Default setting
The Power System's power system setting at
shipment.
User Manual
Table 4-1: Basic Setup Procedure
4.3
Initial Inspection
Prior to shipment this power system was inspected and found free of mechanical or electrical defects.
Upon unpacking of the power system, inspect for any damage which may have occurred in transit. The
inspection should confirm that there is no exterior damage to the power system such as broken knobs
or connectors and that the front panel and meter faces are not scratched or cracked. Keep all packing
material until the inspection has been completed. If damage is detected, file a claim with carrier
immediately and notify the TDK-Lambda sales or service facility nearest you.
Содержание GBSPS10-3000
