TDK-Lambda CUS100MB Series Скачать руководство пользователя страница 14

INSTRUCTION MANUAL

CUS100MB

TDK-Lambda

<Page>

14/14

9. Altitude

CUS100MB is safety approved for operation at below altitude.
- Up to 5000m by IEC60950-1 clearance requirement.
- Up to 5000m by IEC60601-1 clearance requirement.
Thermal evaluation should be considered for products operating at elevated altitudes above 2000m. 

10. Warranty Condition

These products are under warranty for 3 years from the date of shipment. During the warranty period, TDK-Lambda will, 
either repair or replace products prove to be defective. 

3 years warranty applies but not limited to the following.
(1) Average operating temperature (ambient temperature of the power supply unit)is under 40

.   

(2) 3 years warranty base on 24 hours/day operation at 100% load.
Please refer to electrolytic capacitor life time from reliability data for various application conditions such as mounting, load 
derating, operating ambient temperature etc.   
Customer system design could be improved with better electrolytic capacitor life time by selecting proper application method. 

Following cases are not covered by warranty.
(1)   Improper usage like dropping products, applying shock and defects from operation exceeding specification of the units.
(2)   Defects resulting from natural disaster (fire, flood etc.).
(3)   Unauthorized modifications or repair.

Содержание CUS100MB Series















Отзывы: