DKC301DC SLIDING GATE OPERATOR INSTALLATION AND USER’S MANUAL
9
7. Final Check
1. Check the power supply, grounding and wiring before running the device.
2. Release the gear clutch with the release key to determine whether the gate can be moved
manually.
3. If everything is in good working order, tighten the clutch with the key.
4. Switch on the power and run the device to ensure that the gate is sliding smoothly.
5. Adjust the magnet position until the gate opened and closed properly at the limited positions.
8. Maintenance
Keep operator clean at all times.
Ensure the operator is well earthed, and correctly terminated.
Regularly grease the wheels and axles to ensure the gate moves smoothly.
9. Packing List
After receiving the product, you should make an unpack-inspection, in which you should check whether
the product was damaged. You should find the following items in our standard packing:
No.
Item
Diagram or remark
Quantity
1
Bolt M8X100
4 pcs
2
Nut M8
8 pcs
3
Operator base
1 pcs
4
Plate
2 pcs
5
Transmitter YKF06
2 pcs
6
Release key
2 pcs
7
Back up battery
Built-in
1 set
8
Separate transformer
Optional according
to your order
1 pcs
9
User
'
s manual
1 pcs
-S0011-
