DKC301DC SLIDING GATE OPERATOR INSTALLATION AND USER’S MANUAL
7
Fig.5 Control board Diagrams
6. Programming
Short the infrared terminal block(see Fig.5 terminal 4 and 5) if the gate only runs in open direction.
Setting Open and Close Position
1.
Press and hold
SET
(see Fig.5 control board) until ‘
1
’ indicated on the LED display.
2.
Press and hold
OPEN
to set open position, release the button until the gate has reached the
desired position. (You also can press
CLOSE
to close the gate,
OPEN
and
CLOSE
can be used
to adjust the door position.)
3.
Press the
SET
to confirm the open position, and ‘
2
’ will be displayed.
4.
Press and hold
CLOSE
to set close position, release the button until the gate has reached the
Encoder
Pedestrian Mode Key
Keypad
Open button
Close button
Stop button
Com
Battery -
Power +
Power -
Motor
+
B
Alarm lamp
-
Alarm lamp
+
+24V output
Com
Infrared
Motor
-
L
N
POWER SUPPLY
AC240V
Input
Reserve for
mechanical
limit switch
