TCS Goldcard N-100, Руководство пользователя

Страница: 27 / 30

I Think Customer’s Success
27
3. QUICK TROUBLE SHOOTING
Troubles Cause by Measure
Errors in data transfer Rebooting P/C and Printer 1. Void Cards
Errors in designing Design works within 86x54 size
Loosened gap in dispenser Tighten cross bolt (Turn right)
[Ref Picture 1]
Damaged cards including
static electricity, wet
Remove damaged cards, take out all
cards loaded to shake off several times
2. Failed card feeding
Dusts on dispenser roller
Clean the roller after removing cards
[Ref Picture 2]
Dust on the head Clean the head [Ref Picture 3]
Improper Contrast value
amount
Blurred : Set value over [80]
Thick : Set value under [80]
3. Unclear printing/scratched
printing
Error in data transfer Rebooting of P/C and/or Printer
Opened Top Cover Close the top cover firmly
[Ref Picture 4]
4. Open (OPN) signal in display
No ribbon or
wrongly installed ribbon
Supply or reinstall the ribbon
Damaged cards
Printing after removing damaged cards
Broken ribbon
Connect ribbon [Ref Picture 5]
5. Broken ribbon
Over heating
Reduce down contrast value amount
6. Incorrect card position Error in print position Remove dust on the sensor after open
top cover [Ref Picture 6]
Disconnected power cable
and printer cable
Secure power cable and printer cable
connection
7. Stopped Printer
Wrong printer drive Select Goldcard N-1000 Driver
▣ Reminder !
▪ Periodic head cleaning with alcoholized cloth is strongly required especially per every
100 card issuance
▪ Errors due to unobserved handling of the printer is not subject to warranty service
by ITCS.