background image

Product description 

Intended use 

The ASX1300x-0010 is audio front door station series with compact design, suitable for the usage in the 
outdoor and indoor area. 
The series is suitable for surface-mount. 
 

 

For applications, which differ from the intended use or goes beyond it, the manufacturer ac-
cepts no liability. 

 
 

Short description 

  for up to 6 flats 

  nameplate size 31 mm x 12 mm (W x H) 

  housing made of robust aluminium 

  bell push-button made of plastics 

  per bell push-button 2 indoor stations can be allocated 

  durable and energy-saving nameplate illumination 

  shatter-proof nameplate glass 

  acknowledgement tone when pressing the bell button 

  conversation time ex works: 56 seconds / can be adjusted with configuration software configo

TM

 

  any bell push-button can be used to switch the light, light symbol enclosed 

  volume and microphone sensitivity can be adjusted manually 

  door call standby time (to control the short-term memory in indoor stations) ex works: 56 seconds / 

can be adjusted with configuration software configo

TM

 

  voice connection in door call standby time / can be adjusted with configuration software configo

TM

 

 

Содержание ASX1300 -0010 Series

















Отзывы: