R
2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com
4
METER 2 P/REV:
4.00
meter 2 Pulse Per revoltion screen.
Enter the value for the Pulses per revolt-
ion for meter input 2 (this value should be
provided on the CT or Energy Meter from
the Utility). This screen does not show if
NO was selected in step 11.
METER 2 CONSTANT:
1.00
meter 2 Constant Value screen.
Enter the value for the constant for meter
input 2 (this value is provided from utility
company). This screen does not show if
NO was selected in step 11.
METER 2 CU FT/P:
5.00
meter 2 Cubic Feet Per Pulse screen.
Enter the value for Cubic Feet per pulse.
This only applies to
water
,
gas
and
Btu
(this value is provided from utility
company). This screen does not show if
NO was selected in step 11.
METER 2 MULT:
1.00
meter 2 multiplier screen.
Enter the multiplier for meter input 2 (this
value is provided from utility company).
This screen does not show if NO was
selected in step 11.
SETUP METER 3:
NO
meter 3 setup screen.
Select either Yes or No to program Meter
input two. If no is selected skip to step 25.
METER 3 TYPE:
ELEC 1 PH
meter 3 type screen.
Select either ELEC 1 PH, BTU, WATER,
GAS, ELEC 3 PH. This screen does not
show if NO was selected in step 18.
METER 3 CT VALUE:
0.60
meter 3 Ct Value screen.
Enter the value for the CT wired to Meter
input 3 (this value should be provided on
the CT or Energy Meter from the Utility).
This screen does not show if NO was
selected in step 18 or if BTU, Water or
Gas was selected in step 19.
METER 3 P/REV:
4.00
meter 3 Pulse Per revoltion screen.
Enter the value for the Pulses per revolt-
ion for meter input 3 (this value should be
provided on the CT or Energy Meter from
the Utility). This screen does not show if
NO was selected in step 18.
METER 3 CONSTANT:
1.60
meter 3 Constant Value screen.
Enter the value for the constant for meter
input 3 (this value is provided from utility
company). This screen does not show if
NO was selected in step 18.
14.
15.
16.
17.
18.
19.
20.
21.
22.
METER 3 CU FT/P:
5.00
meter 3 Cubic Feet Per Pulse screen.
Enter the value for Cubic Feet per pulse.
This only applies to Water, GAS and BTU
(this value is provided from utility com-
pany). This screen does not show if NO
was selected in step 18.
METER 3 MULT:
1.00
meter 3 multiplier screen.
Enter the multiplier for meter input 3 (this
value is provided from utility company).
This screen does not show if NO was
selected in step 18.
SETUP METER 4:
NO
meter 4 setup screen.
Select either Yes or No to program Meter
input two. If no is selected skip to step 32.
METER 4 TYPE:
ELEC 1 PH
meter 4 type screen.
Select either ELEC 1 PH, BTU, WATER,
GAS, ELEC 3 PH. This screen does not
show if NO was selected in step 25.
METER 4 CT VALUE:
0.60
meter 4 Ct Value screen.
Enter the value for the CT wired to Meter
input 4 (this value should be provided on
the CT or Energy Meter from the Utility).
This screen does not show if NO was
selected in step 25 or if BTU, Water or
Gas was selected in step 26.
METER 4 P/REV:
4.00
meter 4 Pulse Per revoltion screen.
Enter the value for the Pulses per revolt-
ion for meter input 4 (this value should be
provided on the CT or Energy Meter from
the Utility). This screen does not show if
NO was selected in step 25.
METER 4 CONSTANT:
1.60
meter 4 Constant Value screen.
Enter the value for the constant for meter
input 4 (this value is provided from utility
company). This screen does not show if
NO was selected in step 25.
METER 4 CU FT/P:
5.00
meter 4 Cubic Feet Per Pulse screen.
Enter the value for Cubic Feet per pulse.
This only applies to
water
,
gas
and
Btu
(this value is provided from utility
company). This screen does not show if
NO was selected in step 25.
METER 4 MULT:
1.00
meter 4 multiplier screen.
Enter the multiplier for meter input 4 (this
value is provided from utility company).
This screen does not show if NO was
selected in step 25.
23.
24.
25.
26.
27.
28.
29.
30.
31.
