R
2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com
2
Pulse input from local utility.
3
24 VAC transform er. See powering instructions.
2
1
For com m unication wiring, use twisted, shielded 18
AW G . M ust be run separately.
C
R
PO W ER
A
B
REF
se1000
UTILITY METER
PULSE TRANSDUCER
M eter 1 Dem and
+
2
3
3
3
3
a
B
1
reF
DATA
RS485
M ETER 1
M ETER 2
M ETER 3
M ETER 4
PULSE INPUTS
K/y Z
K/y Z
K/y Z
K/y Z
Wiring
The SE1000 uses terminal designations for wiring. See
diagram below.
Powering the se1000
The SE1000 is powered from 24 VAC +/- 20 %.
If wiring for communications, dedicated power must be
used to power the SE1000. Several “S” series control-
lers may be powered from the same transformer, provid-
ed that the transformer has sufficient power. (Supertrols
require 5 VA @ 24 VAC.)
Caution:
Do not connect to 120 VAC. When multiple
TCS Basys Controls devices are using a single
transformer, the polarity of the power wiring
must be maintained because all TCS devices
are half-wave rectified and have common return
paths.
