TCO ICon Pro, Руководство пользователя, Страница: 26 / 33

26
7.
Carefully slide the new filter (Figure 19, pos.
1) into the compartment.
8. Pull the filter lock (Figure 19, pos. 2)
upward and push it forward into the
compartment to lock the filter.
9. Place the compartment panel and tighten
the Allen screws (4x).
10. NOTE : Make sure that the ground wire
(Figure 17, pos. 2) is always connected to
the compartment panel. If needed attach
again.
ATTENTION
The pre-filter collects heavy dirt and keeps it away from the ICon Pro ’s neutralization
and clean compartments. When the ICon Pro ’s air inlets (front and bottom) are very
dirty, it is advisable to change the pre-filter sooner (for example every six months) than
the main HEPA filter.
Figure 19