Safety Instructions
Please read the following instructions carefully to ensure correct use and to prevent
unexpected accident and damage caused by incorrect use.
1. Do not disassemble or modify the IP videophone or power adapter by anyone
other than the authorized personnel.
The warranty will not cover any defect that occurs due to such mishandling.
2. Install the unit on a stable and flat surface to ensure safe operation.
3. Do not install the unit in such a location where the unit can be affected by dust or
gas.
4. Do not install the unit in a place subject to direct sunlight, or near heat sources
such as radiators.
5. Do not touch the electric adapter when it is thundering and lightning to avoid
electric shock.
6. Do not install the unit near humid location to avoid any defect, heat and electric
shock.
7. Keep the unit safe from sudden shock to prevent defect. And do not apply
excessive force especially to the LCD screen and the camera.
8. Clean the camera and LCD screen with soft and clean clothes. Do not use
coarse material to avoid damage.
9. Do not apply sudden change of temperature. Installing in a place with severe
temperature change may cause defect of the unit.
10. Make sure to use the exclusive power adapter.
11. Make sure to turn off the power switch before disconnecting the mains lead.
Disconnecting the main with the power switch on will cause defect of the unit.
12. Disconnect the power cable when the unit is not in use for a long time.
- 3 -
