2.4.3.7 Call Bar
This function sets bars for all incoming and outgoing calls.
When
[Calling Bar]
turns on, all the dialing calls are invalid. There is dialing notice on the
interface.
When
[Called Bar]
turns on, all the incoming calls are rejected with interface notice.
2.4.3.8 3-way Calling
After you dialed the first call and while in the active call, you dial the second call to the third party.
As soon as the third party answers the call, a 3-way calling will be set up between the three
parties.
Operation:
1. When
[3-way Calling]
turns on, you should fill in attached account and ring for controller. (The
attached account and main account should belong to the same SIP Server.)
2. To create a 3-way calling, make the first call as normal and press
<FUNCTION>
then press “7”
which will allow the second call to be made. Upon press the “7”, the music of call hold will be
played. Dial a second call in normal manner. Press “7” again the second call will added to
conference and a three parties conference will be set up.
NOTE:
Make sure that you turn off
[Exten. Service]
before you use the
[3-way Calling]
.
NOTE:
If the second call have been rejected, please press “7” again to resume the original call.
2.4.3.9 Bit Rate
Select bit rate:
Slow :64k bit/s
Normal :128k bit/s
Fast
:384k bit/s
2.4.4 System Setting
[System Setting]
includes Video Adjust, Version EN/CH, System Upgrade, Config Recovery and
System Test.
Video Adjust is for the sets of LCD bright, Expose MIN, Expose MAX and TV output.
[Version EN/CN]
supports two languages - English and Chinese.
In the
[System Upgrade]
menu, IP videophone can download the latest software version from a
remote server through Internet. For details, refers to 3.9
When the configuration is abnormal, you can choose
[Config Recovery]
to restore the back up
configuration or recover initial configuration.
[Config backup]
: backup the current system configuration.
[Config Restore]
: Restore the latest configuration stored on the IP Videophone.
[Config Init]
: Initializes (deletes) all information stored on the IP Videophone.
NOTE:
Please be cautious to apply
[Config Init]
function.
[System Test]
is only for factory test.
- 12 -
