2.5.1 Connect Setting
Operation:
Press
W
X
to select the Internet access method (static IP, DHCP, and PPPoE)
Press
ST
to select a setting item.
Press numeric key and “.” to fill in fields.
Press
<BACK>
to move to the previous menu.
NOTE:
Any information for connection to Internet, please inquire the
ISP
.
2.5.2 Account setting
You must set user’s basic information for SIP call. If the phone is subscribed to the SIP service
provider, the server information must be set up.
a. User Information
Set Display Name, User Name, Auth. ID, Password, SIP Address, all the items must have the
values given by the service provider when the phone is registered to the Internet phone service.
NOTE:
If the IP Videophone is successfully registered to the Internet phone service, the Green
LED is on.
b. Advanced Setting
[Port]
: SIP Server Port. The factory setting is 5060.
[Expires]
: IP Videophone will automatically register to the server in every certain second. It is
about register setting. The factory setting is 3600.
NOTE:
If the advanced setting is changed, the system will be rebooted.
2.5.3 Proxy Setting
Enable to set SIP proxy server address when press
W
X
to select
“ON”
for
[Proxy ON/OFF]
.
2.5.4 STUN Client
This enables videophone to be easily configured to communicate with exterior IP-sharing router
through STUN function.
Enable to set the remote STUN server IP address and port when press
W
X
to select
“ON”
for
[STUN ON/OFF]
.
Keep Alive is only applied to NAT environment.
2.5.5 Network Status
In this menu, the current IP configuration of videophone is shown – IP address, Subnet mask,
Gateway address, DNS address, NAT address, PPPoE address.
2.6 Internet
Internet Share and Web Brower are both enabled in this menu.
- 15 -
