Handling and placement
D
o not trolley the
refrigerator from the
front or back.
Do not operate the refrigerator on
the foam base it was shipped on.
This will help heat dissipation and
reduce the risk of fire.
The refrigerator shall be
placed in an environment
which is dry, has good
ventilation, far from direct
sunshine and heat source.
The refrigerator shall be
placed on
a
flat and firm
surface. If the ground is not
flat, adjust the adjusting leg
to keep it level.
Never place the refrigerator
into a too cold environment
that may get frozen.
Warm prompt:
--When handling the refrigerator, at least two pe
ople
are required – one lifts the top
rear part,
the other one handles the botto
m.
--When moving the refrigerator, the lower runner may damage and scratch the floor. If you
need to move the refrigerator for a long distance, the internal accessories
must
be fixed
using adhesive tape. Otherwise, the accessories may get damaged due to crashing
into
each other.
--Please place the refrigerator in the position with small
exposure
vibration.
--Sufficient clearance shall be left around
the refrigerator
. If the clearance is too small or
goods
are placed
on the top or close to the side,
the heat dissipation of
the
refrigerator will
be affected, and thus to cause unnecessary electric energy waste as well as burn out of the
wall and other goods; the contact between the back and wall will cause vibration and noise;
--Adjust the front part and adjusting leg of the refrigerator to level it.
An
unleveled
refrigerator will cause vibration and noise.
Certain space shall be left
around the refrigerator,
shown in the figure.
>30cm
>10cm
>10cm
8
