MT27S-AP/LA Chassis Aliment procedure
PRELIMINARY INFORMATION ----- SUBJECT TO CHANGE
4
2.2 Factory Menu
Factory Menu
Name
Default
Description
Status
HOTKEY OFF
Factory
Menu
shortcut button switch
The item must be disabled (OFF) after production
OK
WARM- UP
OFF
OFF: Normal mode. Display blue screen when no signal. Turn to
automatically standby mode if keep the signal unavailable over
15 minutes.
ON: Aging mode. Display Red
ˈ
Blue
ˈ
Green
ˈ
White Scene when no
signal. The set will not turn to standby even if the unavailability of
signal, Press MENU of KEY TO exit
OK
WB
>>
White Balance Adjustment ( see details below)
OK
SHOP Init
DO
It is crucial that the function is executed after production aim to clear
information of production process, ensure user cannot access to
Factory Menu after executing the item.
OK
NVM RESET
DO
Restore default value except WB
OK
Pre Channel
DO
Preset the channel table of factory. Option: HZ, WX, NMG, ORION e.g.
To preset the channel table of certain factory, firstly, choose the
corresponding factory name, then press OK button of remote control
and wait until the disappearance of Factory Menu,
OK
PowerMode
LAST/STB
ON: the set will power on after switching on power.
STB: the set will remain standby status after switching on power.
Last: the set will turn to the status in which it lies when last switching
off.
If without requirement from certain customer,
by default, the Setting should be Last for MT27S-AP and STB for
MT27S-LA
OK
DesignMenu1 DO
exclusively used by R&D engineer
OK
DesignMenu2 DO
exclusively used by R&D engineer
OK
Sound Curve
DO
Exclusively used by R&D.
OK
Logo ON/OFF
DO
Display TCL Logo or not. On : display,
Off: not display
OK
VER. DO
software version, release date e.g.,
OK
RFFILTER
Exclusively used by R&D.
ok
