MT27S-AP/LA Chassis Aliment procedure
PRELIMINARY INFORMATION ----- SUBJECT TO CHANGE
9
Color Analyzer CA-210. Video Pattern Generator Chroma2329. Color TV Pattern
Generator PM5418, VGA cable, AV cable(RCA),YPBPR(RCA) cable.
DŽ
Chroma2329
Fluke5418
CA-210
According to the requirement of order, we suggest take the below steps to finish
the appropriate settings
.
A enter the
Factory Menu
, enable
HOTKEY
B Check the version of software, release date displayed at the bottom of
Factory
Menu
. If the information is correct, you can ignore step C and D.
C
Enter
Factory Menu
, choose
DESIGNMENU1->PROJECT ID,
choose corresponding
Project ID number of the product (Please refer to the description in BOM about
Project ID number).
D
return to
DesignMenu1
, check the Product model
.
E choose
Factory Menu-> NVM RESET
and press
and wait until prompt OK
appears.
F restart the set
G according to the requirement of order, set the items of Hotel Menu etc.
H After aging under normal temperature, adjust white balance.
I
choose
Factory Menu-> SHOP INIT
and press
button of remote control to
initialize the set.
Note: after
step I
(execute
SHOP INIT
),
Hotel Menu
will be disabled by default.
Therefore, if order requires hotel function, it is necessary to enable hotel function by
set
Factory Menu-> DesignMenu2->HOTEL MENU ENABLE
to
ON.
Before adjustment, you must ensure Color Analyzer has been calibrated. Only AV1,
YPBPR, VGA , HDMI 1 need to be adjusted. It is necessary to adjustment HDMI 1
firstly.
a. signal and generator
The pattern of the signal should be used are White (Chroma2329 pattern113) and
Grey (pattern 114).The format of signal are respectively 720p for HDMI1
(Chroma2329 Timing 69), NTSC for AV1 (Chroma2329 Timing 37),1024×768@60Hz
5. The steps of debugging
5.1 Device
5.2 steps of debugging
˖
5.3 White Balance adjustment (Manual)
˖
