10
Connections and Setup
Initial Setup
Perform the following steps before you press on the
remote control.
•
Insert the batteries into the remote control.
•
Connect the antenna cable to the TV.
•
Plug in the AC cord to the AC outlet.
•
Connect your TV to a network.
Make sure that the television is switched on and follow
all the steps in turn specified hereafter.
The first time you switch the set on, the Initial setup
wizard opens, which guides you through the initial setup
process.Press
OK
to start your initial setup.(Refer to Figure
1.)
Figure 1
Step 1: Environment
1.
Press
▲
/
▼
to select your language, then press
OK/►
to enter the next step.
2.
Press
▲
/
▼
to select your country, then press
OK/►
to enter the next step.
Note: If you select
France
or
Italy
, you will have to
enter the password setting menu here to set a
password. Use the numeric buttons to enter a
four-digit number as your password. (0000 is too
simple to be set as your password.) Enter the
same code again to confirm the password. After
that, you will enter the next step automatically. (In
this step, you can only press
◄
to return to the
previous step.)
3.
Press
▲
/
▼
to select your location, then press
OK/►
to enter the next step.
Step 2: Network Setup
1.
Press
▲
/
▼
to select your network connection type
(
Wired
or
Wireless
), then press
OK/►
to enter the
next step.
2.
Follow the guides on the screen and press the
corresponding buttons on the remote control to
proceed.
Note: You can also skip this step and step 3 by selecting
“
I do not have a network connection
”
, and
connect to the Internet later. For details please
refer to section
Network Connection.
Step 3: Software Update
1.
If the set has connected to the network successfully,
it will search for upgrade files automatically.
2.
Follow the guides on the screen and press the
corresponding buttons on the remote control to
proceed.
Step 4: Channel Installation
1.
Press
▲
/
▼
to select
Continue
to install channels.
2.
Follow the guides on the screen and press the
corresponding buttons on the remote control to
proceed.
Note: To prevent the channel installation process
from being interrupted, wait for the message
indicating that the installation is complete. You
can also skip this step by selecting
“
I don’t want
to install channels
”
. In this case, to search and
store your channels you may do an automatic
channel search by following the instructions
in the next section
Performing an automatic
channel search
.
Step 5: Clock
If the set was not connected to the network, you can
use the numeric buttons to enter the date and time, then
select the
OK
button and press
OK
to confirm.
When the initial setup is completed, the
Congratulations
message appears. Press
OK
to confirm.
Performing an automatic channel search
This section describes how to search and store channels
automatically. This may be done in any of the cases
below:
- you have selected “
I don't want to install channels
" in
the initial setup;
- you see “
No program info now, please search
channels first!
” in TV mode;
- you want to update your channels.
1.
In TV mode, press or
on the remote control
and select
Settings > Channel > Channel scan
.
Press
OK/
►
to enter.
2.
The TV installs and arranges channels according
to your country. Press
▲
/
▼
to select
Country
, and
press
OK/
►
to enter. Enter the default password
1234 or your own password in case you have
changed the password in the
System > Lock
menu.
Press
▲
/
▼
to select your country and press
OK/
►
to confirm.
3.
Press
▲
/
▼
to select
Tuner mode
, then press
OK/
►
to enter.
•
Press
▲
/
▼
to select
Automatic search
, then
press
OK/
►
to enter.
•
Press
▲
/
▼
to select
Channel type
(
Digital &
Analogue
,
Digital
or
Analogue
), then press
OK
to start the automatic search for all DVB-T digital
and/or analogue channels.
4.
The channel search may take a few minutes. During
the process, you can press
OK
to stop the search
halfway.
5.
After the automatic search, channels are arranged in
a preset order. If you wish to skip channels, modify
the preset order, rename or delete channels, press
or
