TCL 55P6US, Руководство по обслуживанию

Страница: 24 / 39

Test and Alignment Specification for MS6586 Series
Page 19 of 22
Appendix (8) “Network Connection Setup”
Note
⑦
:You can set up your TV so that it can access the Internet through your local area network (LAN) using a
wired or wireless connection.
▪
Wired Network Connection
You can connect your TV to your LAN using cable in three ways:
1) Plug your TV to your LAN by connecting the LAN port on your TV to an external modem using a Cat5 cable.
2) Plug your TV to your LAN by connecting the LAN port on your TV to an IP Sharer which is connected to an
external modem. Use Cat5 cable for the connection
3) Depending on how your network is configured, you may be able to plug your TV to your LAN by connecting the
LAN port on your TV directly to a network wall outlet using a Cat5 cable (Note that the wall outlet is attached to a
modem or router elsewhere in your house)
▪
Wireless Network Connection
To connect your TV to your wireless network, you need a wireless router or modem and a Wireless LAN Adapter.
➢
Select
“
Settings

Network

Wireless settings

WiFi connected

On
”, “
All wireless
” will appear the valid
wireless networks near your area.
➢
Sele
ct available access point and press “
OK/
►” to connect the TV to it.
Note
（
10
） :
-
If you select a protected access point, you will have to enter the corresponding password. Press “OK ”
on the
remote control to display virtual keyboard to enable you to enter the password.
▪
Network Setup
➢
Connect your TV and the available network with the network cable first.
➢
Select
“
Settings

Network

Connecting test
”
to check if the network has connected.
➢
If connected, it will show
“The network connection test is successfully !”If not you can try to enter your IP
address manually to connect the network follow below steps
•
Select “
Settings

Network

Wired settings

I P Settings
” by pressing “
OK/
►” key
•
Enter the “
IP address
”, “
Subnet mask
” “
Default gateway
”, and “
Primary DNS
” values. Use remote
control digital keys to enter number sand “◄/►” key to move from one to other field location
•
After setting all required inputs and save successful, to check the Internet connectivity again
➢
Select
“
Settings

Network

Wired settings
”
, then press “
OK/
►” key to display current connection details,