TCi HarmonicShield Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 29

Introduction HarmonicShield
®
HSD IOM Manual - Rev. D 1
Introduction
Safety Instructions Overview
This section provides the safety instructions which must be followed when installing, operating, and
servicing the HarmonicShield ® (HSD) filter. If neglected, physical injury or death may follow, or damage
may occur to the filter or equipment connected to the HSD filter. The material in this chapter must be
read and understood before attempting any work on, or with, the product.
The HSD filter is intended to be connected to the input terminals of one or more VFDs. Three-phase
power is connected to the input terminals of the HSD and power is supplied to the VFD or VFDs through
the HSD. The instructions, and particularly the safety instructions, for the VFDs, motors, and any other
related equipment must be read, understood, and followed when working on any of the equipment.
Warnings and Cautions
This manual provides two types of safety instructions. Warnings are used to call attention to instructions
that describe steps that must be taken to avoid conditions that can lead to a serious fault condition,
physical injury, or death.
Cautions are used to call attention to instructions that describe steps that must be taken to avoid
conditions that can lead to a malfunction and possible equipment damage.
Warnings
Readers are informed of situations that can result in serious physical injury and/or serious damage to
equipment with warning statements highlighted by the following symbols:
Cautions
Readers are informed of situations that can lead to a malfunction and possible equipment damage with
caution statements:
Caution
General Caution: identifies situations that can lead to a
malfunction and possible equipment damage. The text describes
ways to avoid the situation.
!
Warning
Dangerous Voltage Warning: warns of situations where high
voltage can cause physical injury and/or damage equipment.
The text next to this symbol describes ways to avoid the danger.
Warning
General Warning: warns of situations that can cause physical
injury and/or damage equipment by means other than electrical.
The text next to this symbol describes ways to avoid the danger.
Warning
Electrostatic Discharge Warning: warns of situations in which an
electrostatic discharge can damage equipment. The text next to
this symbol describes ways to avoid the danger.
!