TCi HarmonicShield Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 29

HarmonicShield
®
Introduction
8 HSD IOM Manual - Rev. D
HSD Filter Operation
Caution
Thoroughly check the installation before applying power and operating
the equipment for the first time.
Before Applying Power for the First Time
Inspect the installation to make sure that all equipment has been completely and correctly installed in
accordance with the Installation Guidelines section of this manual.
•
Check to make sure power and ground connections are torqued to recommended
torque value.
•
Check to make sure the enclosure openings on the bottom and the top of the unit are
not blocked or partially obstructed.
•
If the HSD unit includes the optional tuned circuit control contactor, confirm the
contactor relay coil is wired to 110VAC control power.
Operation
Since the HSD is a passive filter, the HSD is always energized and operating whenever the input to the
drive is energized.
!