Ludwig-Rinn-Str. 10-14
D - 35452 Heuchelheim
Phone: +49-(0)641-96284-0
Fax: +49-(0)641-96284-28
www.ambiento.de
Seite 23 von 36
3.4 Installation Operating System and Touch
If the ambiento is delivered without operating system but
it is equipped with touch, please install as following
Steps:
1)
Connect keyboard/mouse and external CD/DVD-
ROM. Please use the two USB-Connection on
outside of the housing (only 1x USB is useable by
equipping with EIB-connection) and 1xUSB internal,
see chapter 3.6.
2)
Install the operating system as discripe of the
producer to the ambiento.
3) to the installation of the Touches you copy the file IQ
Touch of the provided data medium (CD-ROM) on
the HDD. Open this file and providing from the file
MA7_Driver a linkage and insert them into the folder
startup.
4) following start the file MA7_Control for the
calibration of the touch. Adjust in the rider "Comms"
Port=COM1 and Baund=9600. The software scan
automatically and makes the remaining attitudes.
Start under the rider "Calib" start calibration.
Calibrate given the Touch at the points as in pic. 1.
Hold the finger so long into the center to the next
point
appear
perpendicular.
After
successful
calibration the window closes automatically.
5) finally you store the calibration with file >save
6) For using the motion detector please install the PreVsion-Control software (details see
manual PreVision-Control). After Installation, please modify the atributes: Select "Start"
-> "programs" -> "autostart". In the autostart is the software PreVision control, select
„atributes". Select in the atributes the rider "linkages". Extend manually the „target“ after
the word minimized with ambiento.
3.41 resisitive touch
Please follow by installation of the resitive touch the installation routine of delivered CD
(…Treiber/Egalax/setup)
Pic1: calibration
