Appendix: NTCIP Configuration
The National Transportation Communications for ITS Protocol (NTCIP) provides a
communications standard that ensures the interoperability and interchangeability of traffic
control and Intelligent Transportation Systems (ITS) devices. This appendix provides
information about the conformance groups which are supported by the BC840-MC.
In This Chapter
Supported conformance groups
The BC840-MC firmware supports all the mandatory parts and some of the optional parts (see
table below) of the NTCIP CCTV specification as laid down in the NTCIP 1205:2001 v01.08
document. This means that - in terms of section 4 of this document - the following
conformance groups are supported.
Conformance group
Reference
Conformance
requirement
Configuration
NTCIP 1201:1996
mandatory
CCTV Configuration
NTCIP 1205
mandatory
Motion Control
NTCIP 1205
optional
Conformance statement table
Configuration
Most of the Configuration conformance group objects listed below contain static device
information.
● Global Set ID parameter
● Maximum modules parameter
● Module table
● Module number
● Module device node
● Module make
● Module model
● Model version
● Module type
● Base standards parameter
153
