![background image](http://html.mh-extra.com/html/tc-helicon/perform-ve/perform-ve_reference-manual_824109028.webp)
28
Looper Quantize
Perform-VE’s looper can either quantize your drum events as they are recorded, or can leave their timing
untouched. If Quantizing is enabled, drum events will be ‘corrected’ to the closest 16
th
note as they are
recorded, resulting in a tighter more ‘machine-like’ groove.
To enable/disable Looper Quantize, press SET and TAP to
toggle between OFF and ON.
Range: OFF, ON
Quantizing applies to external and internal clock setups, even when you lay down the very first pass of a drum
loop under internal clock control. Once drum events have been recorded as quantized, disabling quantize will
not restore their original timing.
If you find that the drum patterns you wish to record do not play back as intended, try erasing and re-recording
them with the quantize set to the opposite value. Syncopated drum beats work best with quantize disabled,
while robotic beats and quantization go great together.
Looper: Drums Level
To adjust the drum loop level, hold the loop corner button
while turning the Control Knob.
Range: -60 dB to 0 dB
Looper:
kick
Press the
kick
corner button to trigger the kick sample - you can do this whether you are recording or not.
Hold the
kick
corner button while turning the Control Knob to select one of four kick drum samples:
A green LED indicates an acoustic kick, while red LEDs indicate an electronic kick.
Содержание PERFORM-VE
Страница 1: ...1 PERFORM VE Preliminary Reference Manual ...