TC-Helicon PERFORM-VE Скачать руководство пользователя страница 5

Страница: 5 / 37

HINT: Red in VU meter LED is not a good thing as it means hard clipping and digital distortion! Reduce the

microphone gain and try again if you see the VU LED turning red when you are vocalizing.

MIDI Channel

The MIDI channel that Perform-VE responds to is actually set during the Auto-Gain procedure

a MIDI note

event is received

while

the SET button is held down.

To set the MIDI Channel (without a split point):

•

Press and Hold

the SET button,

•

Play a single MIDI note on your controller,

•

Release the SET button.

Don’t worry about having to repeat the Auto-Gain on the microphone – these steps will not overwrite your

previous microphone level settings while the SET button is down, provided you stay quiet… so, shh!

When complete, you can verify Perform-VE is set to receive on the correct MIDI channel for your keyboard by

playing notes and monitoring the SET button; the SET button will flash red whenever MIDI note events are

received on the configured MIDI channel.

Even more SET button powers!

You can also configure Perform-VE to ignore MIDI notes above or below a user-defined note value. This is called

Split Point

. A split point is useful when you want to control an instrument other than Perform-VE with one part

of your keyboard, but still want Perform-VE to respond to keys pressed on the remaining keys. Split points with

optional octave shifts are explained in detail at the end of this manual in the MIDI Implementation section.

When combined with other button presses, the SET button also configures Adaptive Tone, Phantom Power, MP-

75/MP-76 Mic support, Drum Looper features, and will even dump effect presets via MIDI. Please see the

relevant sections later in this manual for details.

Now that your Perform-VE is set up and connected to the devices of your choosing, we’re going to take a quick

tour of the front panel, explaining what each of the buttons do without getting too deep in any details just yet.

Don’t worry – we’ll go feature diving soon enough!

Содержание PERFORM-VE






































Результаты поиска

Содержание PERFORM-VE

Отзывы:

Похожие инструкции для PERFORM-VE

Бренды по названию

Популярные бренды

TC-Helicon PERFORM-VE, Справочное руководство

Результаты поиска

Содержание PERFORM-VE

Отзывы:

Похожие инструкции для PERFORM-VE

Бренды по названию

Популярные бренды