KMS-2/Exia/Exd Transmitter
Installation and Operating Manual
Page 5 of 16 KMS-2:Exia/Exd IOM
Rev H 18/05/10
ATEX
Typical Installation When Fitted to Magnetic Level Gauge
For Zone 0 areas, refer to the section covering ‘Special Conditions For Safe Use’ under Certification.
Fig 2
Immersion Application
Ensure that the PFA/PTFE washer is correctly fitted to prevent the risk of sparking if the
float was to hit the stop.
Ensure that the electronic assembly is maintained within the certified ambient
temperature range consult sales office to determine correct offset.
