TC Electronic SYSTEM 6000 MKII Скачать руководство пользователя страница 14

Страница: 14 / 60

Step 2 - Mac & PC

• The three software types are now be visible when you

press the panes: Frames, DSP and NET.

The Icon editor shows the update status via a progress bar.

• Update the software in the following order:

- Frame

- NET

- DSP

A log file of the update can be obtained for service

purposes. The file is saved at the location where the

software is uploaded from. The file lists the result of the

operation and can be opened with most text editors.

The file is saved in the same folder as the software is

placed and read/write access for that folder must be set.

To verify correct update-procedure has taken

place, - check the software version numbers both

before and after an update. These version numbers

are located on the Frame/System/Main/Net page.

SYSTEM 6000 NETWORK & UPDATING SOFTWARE

Updating Software

System 6000 is a constantly evolving platform and updating

software is a standard procedure to keep the system up-to-

date. Upgrading is easily done following the procedures

below.

This first section

deals with updating software for the

Mainframe - NOT the hardware version of the TC Icon

MKII. To learn about updating the software for the

hardware Icon please see the section “Updating TC Icon

Software”.

Updating Mainframe 6000 software

There are three types of software in a System 6000

mainframe.

• Frame software

• Net (Ethernet) software

• DSP software

There is also software for the AES-8 card. This software is

rarely updated and should

only

be upgraded if a newer

AES-8 software version than the one you are currently

using, is available. Please follow the update instructions

provided with the downloaded AES-8 software.

Acquiring the latest software

Latest software can be downloaded via

www.tcelectronic.com or directly via the pages:

http://www.tcelectronic.com/reverb6000software.asp

http://www.tcelectronic.com/software mastering6000.asp

- depending on your model.

• Install the TC Icon Editor on you PC or Mac if you

haven't done so already (see the section: TC Icon Editor

Installation on the following pages)

Step 1

• Create a folder called “S6Kupdate” in the root directory

on your “c” drive. The folder path is then -

c:\S6Kupdate

• Copy the latest Frame, DSP and Ethernet software files

to this folder

• In the TC Icon editor go to the Frame-System-Update

page and enter the path “C:\S6Kupdate” as the Update

folder path

- go to

Step 2

MAC

• Create a folder under “Home” called “S6Kupdate”

The path for that folder is then -

/Users/xx/S6Kupdate

(xx - is the username)

• Copy the latest Frame, DSP and Ethernet sw files to this

folder.

• In the TC Icon editor go to the Frame-System-Update

page and enter the path “/Users/xx/S6Kupdate” as the

Update folder path

- go to

Step 2

Содержание SYSTEM 6000 MKII





























































Результаты поиска

Содержание SYSTEM 6000 MKII

Отзывы:

Бренды по названию

Популярные бренды

TC Electronic SYSTEM 6000 MKII, Руководство по эксплуатации

Результаты поиска

Содержание SYSTEM 6000 MKII

Отзывы:

Бренды по названию

Популярные бренды