TC Electronic M300, Руководство пользователя, Страница: 26 / 34

24
MULTI-EFFECTS
This manual section explains the function of the front panel controls as well as the algorithm
parameters in the Multi-effects section.
Example - TIMING knob
Let us just explore the Tap Tempo and Timing
functions a bit further:
With a Studio Delay algorithm selected you tap
quarter notes in tempo 120BPM using the TAP
key. With the TIMING knob in 12 o’clock
position you now have a Delay time of 500ms.
If you turn the TIMING knob fully counter-clock
wise the actual Delay time will be:
0.5 times 500ms= 250ms
If you turn the TIMING knob fully clockwise the
tempo will be:
2 times 500ms=1000ms (1 second)
When powering up the M300 the default
Tempo is 120BPM, but as explained the
position of the TIMING knob defines the
actual tempo.
You should also note that the range varies
depending on the selected Delay type.
E.g. - as a short Delay time is what defines a
Slapback Delay, the range is considerably
lower than in any other Delay algorithm.
When using the M300 in a Dual Send/
Return setup the MIX knob should be set
to 100% wet.
Delay Types
Dynamic Delay
The Dynamic Delay initially introduced in the
well-recognized TC 2290, is a function that
allows the Delay Output level to be actively
altered by the dynamics of the Input level.
The basic idea is to have a lower level of the
Delay repeats while the instruments are played
(or vocals are sung) and an increased level of
Delay when no Input is present.
A function that leaves the source material clear
and undisturbed while played and delicately
accompanied by the Delay between phrases.
With the correct settings you will be amazed
how you can use Delay effects on material
where you previously never considered this an
option.
Delay - controls
TIMING knob
Both the TIMING and the TAP keys are
used to specify the desired tempo of the
repeats.
A tempo is tapped on the TAP key and with
the TIMING knob you multiply this tempo.
The range of the TIMING knob is 0.5 to 2.
See example below
FEEDBACK knob
The FEEDBACK knob sets the number of
Delay repeats. Leaving the knob in
12 o’clock position gives you the starting
point suggested by TC Electronic.