manualshive.com logo in svg

TC Electronic M2000, Руководство пользователя, Страница: 18 / 37

Поделиться
Скачать
TC Electronic M2000 Скачать руководство пользователя страница 18

18

UTIL/MIDI

Display

Viewing Angle:

Adjust for best contrast on the LCD display.

Preset glide:

Glide time

This parameter sets the glide time of the incoming preset. The
parameter is only active when Preset glide Routing is selected
(See Routing).

In the MIDI section you are able to see the MIDI setup
of both Engine 1, Engine 2 and the Combined section
at the same time.

MIDI In 

Channel

Sets the Channel of which the current Engine will respond to.
When set to Omni the Engine will respond to all channels, When
set to off no MIDI will be received.

Filter       

Sets whether the current section of the M2000 should respond to
MIDI Control changes (CTRL) and MIDI Program changes
(PROG) or not; i.e., when Filter is set to PROG the M2000 will
only respond to MIDI Program changes.

Offset

With this parameter, you are able to add or subtract to the incom-
ing Program change; i.e., the incoming Program Change is preset
123, and the Offset is set to +1, the Program Change will now be
124. 

Sys-ex id

Sets the Sys-Ex ID number of the M2000.

How to move around

In the Util/MIDI menu you always move by pressing the
Cursor keys and change values by dialing the Adjust
wheel.

Содержание M2000






































Отзывы:

Нет отзывов