TC Electronic M2000 Скачать руководство пользователя страница 11

11

Preset banks

NORMAL

Factory presets

Your own presets

COMBINED

The M2000 contains four different preset banks. Each bank can
hold 128 presets.

The four banks are as follows:

Normal ROM bank:

This bank contains 128 normal factory presets. The presets are
available from Engine 1 and Engine 2.

Combined ROM bank:

The Combined bank contains 128 Combined factory presets. The

Factory/User Presets

presets are available from the Combined Recall.

Normal RAM bank:

This bank can hold up to 128 of your normal presets.

Combined RAM bank

:

The Combined Ram bank can hold up to 128 of your Combined
presets (see Combined presets).

The two Ram preset banks are located after the corresponding
Rom banks . This means that you scroll through the 128 Rom
presets to enter the Ram bank.

For fast RAM access press shift and turn Adjust
wheel one click to the right.

The Preset number and the OK key will be blinking while you
are previewing, indicating that the shown preset is not Recalled
yet.
A Combined preset is made out of two normal presets. This
means that when you return to the normal Recall display (the
Homepage) the M2000 will display the numbers and names of
the two presets that the Combined preset consists of. The Edited
flag will light if the presets have been modified.

Combined Recall

The M2000 is capable of Recalling Combined presets, meaning a
preset for each Engine in a combination.
A Combined preset consists of two normal presets and the
Routing of the M2000: i.e. by Recalling Combined preset 30, a
Chorus will be loaded into Engine 1; a Reverb will be loaded into
Engine 2, and the Routing will change to Serial (see »Routing«).

To Recall a Combined preset

:

Press the Combined Recall key and scroll through the
presets using the Adjust wheel. Press OK when you
find the right preset.

128 RAM

PRESETS

128 ROM

PRESETS

128 RAM

PRESETS

128 ROM

PRESETS

A Snapshot will always include both Presets, and Routing just
like a Combined preset. 
With the Snapshots you are able to switch between completely
different configurations with the touch of a single key.

TAKING A SNAPSHOT:

When you want to Take a Snapshot of your M2000 setup, press
Shift and the Snapshot key where you want to store.

RECALLING A SNAPSHOT:

Recall of a Snapshot is very easy as well: Simply press the
Snapshot you wish to Recall and the M2000 will change the
whole setup.

Snapshots

The Snapshots are fast Recall keys. Store your favorite
presets or use the Snapshots as four compare keys.

Содержание M2000






































Отзывы: