TC Electronic LM2, Руководство пользователя

Страница: 10 / 46

OvERvIEw OPERATINg LM2
10
1 - POWER key
Power on/off. Press to turn the unit on. Press and hold to
turn the unit off.
2 - PCMCIA Card Slot
A PCMCIA card can be used for backing up settings and
for system updates. LM2 handles PCMCIA cards from
512 kb to 2 MB.
3 - METERS
These meters indicate the true-peak level as defined
in ITU-R BS.1770-2. The range is from -60 dB to -1
dB. Meters may be switched between pre and post the
true-peak limiter.
4 - LED indicators
ERROR
The Error LED indicates a serious system or setup error,
for instance the lack of selected digital input or the lack
of selected input clock.
AES, SPDIF and ADAT/TOS
Indicates which digital input source that is currently
selected in the I/O menu.
48 kHz and 44.1
A steady LED indicates the current sample rate. If a
digital input is the audio source and Clock Select is set
to internal 44.1 or 48 kHz the LED’s show the incoming
clock rate - not the selected internal rate.
48 kHz lock is indicated with a green LED
44.1 kHz lock is indicated with a yellow LED, - as this is
not standard sample rate in broadcast.
If a digital input is selected and not available, 48 and
44.1 kHz LEDs start blinking. This also happens if the
selected input clock is lost.
COM/REM
The LED is lit when commands are received through the
remote COM port.
EDITED
Indicates that settings have been changed compared to
the currently recalled preset.
5 - Display
On the Home page, Loudness Descriptors are displayed
in the lower corners. The display may also show
parameters and store/recall parameters.