manualshive.com logo in svg

TC Communications TC1920, Руководство пользователя

Поделиться
Скачать
TC Communications TC1920 Скачать руководство пользователя страница 88

 B Safety 

Environment

B-3

TC1920 Rev 1.3     User Manual

•

The device does not contain any service components. Internal fuses 
only trigger if there is a fault in the device. If the device is not 
functioning correctly, or if it is damaged, switch off the voltage supply 
and contact TC communications customer service.

•

Only switch on the supply voltage to the device if the housing is closed, 
the terminal blocks are wired up correctly and the terminal blocks are 
connected to the correct type of voltage supply.

B.3.0.2

Grounding

All TC Communications products are fully grounded and are in compliance 
accordance with all regulations and 

Specifications, 

on page 1-6.

B.3.0.3

Housing

Only technicians authorized by TC Communications are permitted to open 
the housing and break the seal. 

•

Ensure that the electrical installation meets local or nationally applicable 
safety regulations.

•

Never insert pointed objects (thin screwdrivers, wires, etc.) into the 
inside of the ventilation holes in the side of the housing! Failure to 
observe this point may result in injuries caused by electric shocks.

B.4

Environment

"Industrial Hardened" and "Industrial Ethernet" describe communications 
products designed to operate in industrial process control environments or 
geographical locations where harsh conditions are common. 

To meet this level of durability, "Industrial" grade (synonyms for "industrial" 
commonly include "rugged," "outdoor," "hardened," and "substation 
hardened") TC's communications products are manufactured with special 
components, connectors and circuitry. This ensures reliable operation in the 
event of wide temperature swings, electromagnetic interference (EMI), radio 
interference, vibrations, or moisture and humidity fluctuations. Conformal 
coating is optional.

TC Communications Industrial Grade products are designed to exceed 
pertinent industry specifications. For example, communications equipment 
used in power substations are subject to extremes of temperature and 
humidity, as well as electrical transients from high voltage switching.

These environmental conditions are described in industrial standard 
specifications IEC 61850-3 and IEEE 1613 for networking devices. Similarly, 
equipment used for traffic control applications are required to withstand 
roadside vibration in addition to high/low heat and humidity. Testing 
standards pertinent to traffic control are described in the environmental 
requirements of the NEMA TS-2 standard.

Содержание TC1920


























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды