TC Communications TC1920, Руководство пользователя

Страница: 23 / 89

TC1920 Rev 1.3 User Manual 1.0 3-1
Chapter 3 Quick Start Guide
3.1 Introduction
The TC1920 is designed for quick and easy installation and validation. After
the mechanical installation (see
2.3 Power Supply, on page 2-1
), this quick-
start chapter describes how to perform the TC1920 initial setup in a basic
network application.
3.2 Master/Slave Pairing Modes
As a quick and easy tool to setup and validate the TC1920 on a LAN, the
Master and Slave pairing modes were created.
Each mode consists of preset configurations that allow two units to be
quickly setup to paired and operating with one another immediately after
boot-up.
Once boot-up has completed, LEDs should indicate that the units have
linked with each other. At this point calls can be made between the two
units. If the units indicate link and calls can be made, then this is a quick
validation that the network is able to support the TC1920.
3.2.1 Master Presets
The following are the basic presets for a unit in Master mode.
3.2.2 Slave Presets
The following are the basic presets for a unit in Master mode.
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Phone Number: 101
Hotlink Number: 201
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Phone Number: 201
Hotlink Number: 101